Skip to main content

Centrifugal Pumps

What is a centrifugal pump and its manometric head? How to calculate discharge, efficiency and power required for a centrifugal pump using formula?

A centrifugal pump is a machine which converts the kinetic energy of the water into pressure energy before the water leaves its casing. The flow of water leaving the impeller is free vortex. The impeller of a centrifugal pump may have volute casing, vortex casing and volute casing with guide blades.
blades.

The following important points may be noted for centrifugal pumps:

(a) The manometric head is the actual head of water against which a centrifugal pump has to
work. It may be obtained by using the following relations, i.e.,

Manometric head = Workdone per kg of water - Losses within the impeller
 
= Energy per kg at outlet of impeller - Energy per kg at inlet of impeller
 
= Suction lift + Loss of head in suction pipe due to friction + Delivery lift + Loss of head in delivery pipe due to friction + Velocity head in the delivery pipe.

(b) The discharge (Q) of a centrifugal pump is given by

Centrifugal Pumps

(c) The manometric efficiency of a centrifugal pump is defined as the ratio of the manometric head to the energy supplied by the impeller.

(d) The mechanical efficiency of a centrifugal pump is defined as the ratio of energy available at the impeller to the energy supplied to the pump by the prime mover.

(e) The overall efficiency of a centrifugal pump is defined as the energy supplied to the pump to the energy available at the impeller.

(f) The efficiency of a centrifugal pump will be maximum when the blades are bent backward.

(g) The power required to drive a centrifugal pump is given by

Comments

Post a Comment

Popular posts from this blog

Are Engineers Favourite Among Girls?

What do girls think about men who are engineers and what type of engineers are most favourite among girls? A survey was conducted by a team of aboutmech with members chosen from different countries. Each team member carried out a neutral survey in his/ her country to evaluate what females think about most of the engineers from different engineering branches. An overview of different questions asked in survey is given below:

Question: Which male engineers do you find more attractive as a husband?
Almost 50% women voted for mechanical engineers to be the most attractive husbands among other engineers. So mechanical engineers are most favourite among girls as a husband. They find them more trustworthy, intelligent, and creative. A married women from California said, “If your husband is a mechanical engineer, he will help you in everyday tasks. Because mechanical engineers are good team players and they have creative ideas about everything.”

Best CV Format for Mechanical Engineers

Fifty percent engineers fail to grab a dream job because of basic faults in their CVs/ Resume. This article tells you about best CV format for mechanical engineers and how you are supposed to design your CV when applying for jobs. You CV is your first impression on future employer. He/ she does not know you. Your CV is the only representation of your personality. He/ she may select or reject you after first glance on your resume. 
I have experienced shortlisting and interviewing candidates for different jobs. I was astonished to learn that most of the candidates simply copy paste each others CVs without any changes at all. These types of CVs are rejected immediately. I am not trying to tell you that you should avoid copying, rather i ma telling you to refrain from giving your CV to your friends.
An ideal CV consists of following portions:
Name/ Address of the applicantObjectiveEducation RecordEmployment HistoryProfessional SkillsAwards & AchievementsCo-Curricular Activities/ Inter…

Engineering Mechanics - Introduction

The Engineering Mechanics is that branch of Engineering-science which deals with the principles of mechanics along with their applications to engineering problems. It is sub-divided into the following two main groups:

(a) Statics, and (b) Dynamics

The Statics is that branch of Engineering Mechanics which deals with the forces and their effects, while acting upon the bodies at rest.

The Dynamics is that branch of Engineering Mechanics which deals with the forces and their effects, while acting upon the bodies in motion. It is further sub-divided into the following two branches:

(i) Kinetics, and (ii) Kinematics

The Kinetics is that branch of Dynamics, which deals with the bodies in motion due to the application of forces.

The Kinematics is that branch of Dynamics which deals with the bodies in motion without taking into account the forces which are responsible for the motion.